Standard material container Print

 MCL 311 galvanised, inner door fitting long side, with attachments
 Image

The SIEBAU material container is made for use on building sites. It is suitable for various applications,
because all basic models have been fitted with lifting units that will hold a total of up to 3 tonnes.
Robust, with sturdy, compact angular construction. All models are easy to assemble.
Multiple assemblies do not pose a problem because holes have been provided for the fittings.

 MCL 311 base-coated, inner door fitting long side, with attachments
 Image

 MCL 321, plated and
 MCL 311, galvanised		 MCL 211, 
 base-coated
 Image Image

Walls and ceiling elements are made of hot-dip galvanised trapezium profiles. Wall, ceiling and floor
profiles are made from hot-dip galvanised steel. All models are fitted with a single wing door, 1.30m
wide and 1.96m high. (Standard installation: long side).

Installation on all sides of the container possible at no extra cost.

Doors with 3-way bar locking and lock with drill-proof cylinder come as standard. For an extra charge:
2-wing door, 1.94m wide and 1.96m high. The roof is suitable for walking on and can hold 125kg/m2 snow.
Drainage is provided by an internal gutter.

The floor has a timber beam construction on a high quality material base (OSB). Weight bearing
capacity: 500kg/m² .

Unrivalled security:  all wall and ceiling elements are screwed together from the inside.
This practically rules out container goods theft carried out by unscrewing the container from the outside.

NEW! Extra security:  3-way bar locking for doors above and below as standard.

 MCL 321 base-coated, 2-wing door in short side, (diagram with accessoris).
 Image

 

 
 
[ Back ]